Posted on: 2016-03-20 10:46:54<< Older post Newer post >>Once you flush a toilet and it doesn’t work the way it should, you will be asking a lot of questions. As you turn off the water in the toilet and it is not going below, then there must be a problem. A nozzle is one of the hoses attached that you can use to check if your toilet block can be easily fixed. Grab your rubber gloves and put a towel around it. In case there is overflow, then you can catch it immediately. You might also use tools to do the jobThe process of using a plunger is quite easier than using a snake. Every homeowner should have this to solve a
blocked toilet Kentish Town. Plungers are designed to be sunk down to create a pressure in the toilet bowl. A plunger helps to unclog your toilet bowl and using this process can sometimes easily solve your problem. To use the plunger properly, flow hot water on the plunger to soften the surface. This way, it will be more flexible to use. Push the plunger on the bowl and make sure there is no air that can go through. Slowly add pressure before releasing it by pulling it. The clog should be cleared once you do this step several times. If you are using plumbing snakeIf you use a plumbing snake, it can go right in the hole and break the clogs. Uncoil the snake and make a horizontal line and then push it inside the drain. It is important to be careful because you may break or scratch the inside pipe. VacuumA regular vacuum may not be able to handle water properly. You can use a wet vacuum to run in the clogged toilet and suck the water out.
<< Older post Newer post >>
CALL US NOW 020 3519 0557 NO CALL-OUT FEE